In the process of industrial development, if you want to produce a variety of high-quality products, in this case, you must use a variety of molds for production. For example, when making some plastic products, you may need to use Injection molds, so for the industry, it is not only necessary to pay attention to the production links of various products, but more importantly, to pay attention to the production links of molds, because if a relatively perfect mold can be created, it will naturally be able to be used in the process of use. Effectively improve the quality of the product, however, the mold opening work is very important, and sufficient preparations need to be made before this, so what preparations need to be done for the designer?

First, confirm the product map

This is a more important aspect, just like those construction companies, before starting a project, you need to carefully compare the drawings to see if there are errors in some annotations and dimensions in the drawings, and before the mold is opened Designers and production personnel also need to further confirm the product drawings, especially to see whether the materials used and the various proportions are exactly the same as the design plan, and on the other hand, look at the size of the mold There is no error, because once the size is wrong, various products produced by using this mold will also have various errors, and you also need to compare it with the size of the 3D image, if there is a size deviation The problem must be adjusted in time.

Second, determine whether a special process is required

I believe many people should be able to know that no matter what kind of mold, if there are various problems on the surface of these molds, such as dimensional deviation and various problems of inequality, then after the mold is opened, this mold will It is difficult to produce high-quality products, so before starting design and production, it is necessary to see whether the material used needs to be surface treated with some special processes, especially to see if its surface will appear Burrs, if any, need to be treated by pressing burrs. In addition, you should also check whether there are sharp corners at the corners of these molds. If there are these problems, these sharp corners also need to be polished.

Third, conduct tests and trials

When the mold opening work is completed, do not directly hand it to your own customers at this time, but let them take a look in your factory to see if they are satisfied with the samples produced, it is best to let them Take it back and try it out to see if it can achieve the desired effect when using this mold to produce products. If it can achieve the ideal effect, it is the best. At this time, you can start according to the corresponding production method. Large-scale production, but if it cannot meet the requirements or standards of use, you still need to modify it at this time. Only in this way can you ensure that this mold can play a key role.